Besler
2800 Series
Cotton Stalk Puller is ideal for pre-plant seed bed perparation
in cotton. It can be adjusted to cut or pull the cotton stalk from
the ground allowing minimum till farming with little ground disturbance.
Low tractor horsepower, and high-speed operation
allows for quick and efficient ground preparation.
It is available in 4 to 16 row machines with
an option of rigid or parallel linkage row units on a rigid or folding
tool bar.
|
|
|
- Available
in sizes 4 row through 12 row
- Rigid or
folding models are available
- Rugged 7x7
tool bar
- 28"
Cleated Disc
- Sealed Bearings
on Disc
- Adjustable
Parallel Linkage
- Rolling Basket
- Triple Sealed
Bearing on Basket
- Optional
24" Disc for 30" Row Spacing
|
- Pulls the
Cotton Stalk
- Levels the
Seed Bed & Incorporates the Cover Crop
- Hi-Speed
Operation - Low Horsepower
- Advantageous
in Minimum Tillage Practices
The
unique design of the parallel linkage catches the debris thrown
from the disc and funnels it into the rolling basket.
|
|
|
|
Hiniker
 Joining
the reknown 1000 and 5000 model Hiniker cultivators, the new 6000
Cultivator is destined to usher in a new era of conservation
tillage technology.
- Highest toolbar
clearance in the industry.
- Auto-reset
mechanism for improved rock protection.
- Exclusive
lever (no-wrench) adjustment of depth, coulter, and down pressure.
- Oscillating
gauge wheels offer planter like depth control.
- New chrome
carbide point and double sided 1095 steel shares outwear and outweed
sweeps without troublesome slabbing.
 Flood
irrigation, ridge planting, bedding cotton, in fact whenever you
need to move soil into the row, the 6000 is your tool. Flip down
the adjustable ridgers and conform the soil to your exact specifications.
 Quick
and easy pin adjustments permit 10 horizontal and 14 vertical settings.
|
|
Back
to Top
|
J.
S. Ag Innovations
 Planter
Crumble Closing Disc
- Blades fit
existing 8" covering disc brackets (John Deere, Case IH,
Kinze.)
- Hardened
steel blades poke and tear through high redsidue without plugging,
EXCELLENT IN NO-TILL, MINIMUM, CONVENTIONAL.
- Blades close
the seed trench without slabbing soil or disturbing seed placement.
- Eliminate
sidewall compaction and promote better seedling emergence and
development.
|
|
Back
to Top
|
 Redball
Convert your
tractor into a reliable and efficient spraying machine with Redball's
Model 655 High Clearance Three-Point Sprayer. The 655 is
available with 60' to 90' wide front fold booms.
For a shock-free
ride, the 655 features Redball's exclusive rubber torsion (Henschen)
suspension system.
Redball also
offers a wide variety of tractor-mounted tanks and pumping kits
to fit your needs.
|
Redball's 420
Lay-By Spray-Hood™ Model limits spray drift potential while
making precise applications in Roundup Ready® crops. The 420
is another innovative hooded sprayer from Redball designed to help
you make accurate, directed spray applications. The 420 is especially
useful in Roundup Ready® cotton.
 Center
skid is adjustable to set minimum hood height, which allows the
hood to follow ground contours. Shown with optional plumbing packages,
dual application kit, post direct kit and hose drop kit.
The "stack
fold" toolbar is available for 12 and 16 row narrow units and
8, 10 and 12 row wide units.
|
|
 Redball's
410 Conservation Spray-Hood™ Model is perfect for the
application of Roundup UltraMAX™ in conventional crops. The
Model 410 allows you to apply between the rows so you can eliminate
cultivation in cotton, soybeans, milo, and corn.
Consider these
facts:
- Spray-Hood
limits chemical drift resulting in excellent crop safety.
- Spraying
is faster than cultivation.
- Spraying
provides better weed control than cultivation.
- Spraying
is economical as it is accomplished with lighter, more fuel efficient
equipment.
- Spraying
doesn't cause the moistrure loss associated with cultivation.
- Spraying
doesn't bring up fresh weed seeds into the germination zone.
- Spraying
will not spread perennial weeds, such as Bermudagrass and Johnsongrass,
as cultivation does.
|
Redball
Spray Application Equipment
Front and
Side Mount Tanks
 Front
Mount Features
- Front Mount
tank system designed to fit John Deere 8000, 7800, 7400, and 6400
series. Also designed for Case-IH magnum and MX series.
- 250 and 400
gallon teardrop front mount tanks close couple positioning keeps
weight very tight to front of the tractor
- Deep sump
and jet agitaion.
- Optional
ladder and handrail helps provide easy access to top tank fill.
- Light kit
option available.
- Pump and
plumbing kits sold separately.
 Side
Mount Features
- Designed
for various Case-IH, New Holland, Genesis, Cat Challenger and
John Deere models. The heavy duty saddle tank systems feature
360 or 500 gallon capacities.
- The teardrop
design maximizes the operator's forward vision and access to cab.
- 10"
fill opening, deep bottom sump for complete product withdrawal.
- Three year
tank warranty.
- Complete
kit includes two tanks, saddles straps, jet agitation and mounting
brackets.
- Pump and
plumbing kits sold separately.
|
|
Back
to Top
|
 Yetter
2967 Residue
Manager
The residue manager that competitors can only try to match
- mounts directly
to the planter face plate
- fits most
popular planters
- delivers
one-pass residue clearance
- can be used
on front of Do-Alls
 2960/2967
Combination Coulter / Residue Manager
The industry's first - and still best - coulter/residue manager
combination
- mounts on
the front of most popular planter units
- complete
one-pass planting: residue clearance, soil preparation and planting
- choose from
an array of Yetter coulter blades to match soil types and planting
conditions
- specify additional
planter downpressure springs to optimize effectiveness
|
|
Back
to Top
|
